NS48SA
POLYWOOD Nautical 48" Swing
- Regular price
-
$779.00 - Regular price
-
$1,110.00 - Sale price
-
$779.00
Couldn't load pickup availability
- Contoured nautical comfort: a curved, contoured seat and coastal-inspired slat back make this 48" swing a relaxing spot for reading, conversation or winding down.
- Ready to hang: includes an adjustable zinc-plated chain kit that fits ceilings up to 9', with a 45" wide seat and a 300 lb. weight capacity per seat.
- Made from 100% recycled plastic. POLYWOOD® lumber won't rot, crack, splinter or peel, and never needs painting or staining.
- Made in the USA in Indiana and North Carolina, and backed by a 20-year residential warranty.
- 13 colors to choose from: including White, Slate Grey, Black, Sand, Teak and the Vintage and Natural finishes.
- Space and weight capacity: needs a clear area about 6½ ft wide × 8–10 ft deep to swing (3–4 ft front and back, 12–14" on each side) and holds up to 300 lbs per seat.
POLYWOOD Nautical 48" Swing: coastal style for easy porch relaxing
The POLYWOOD® Nautical 48" Swing brings a relaxed, coastal look to porches, patios and garden retreats, with a contoured seat that stays comfortable for hours. It hangs from the included adjustable chain kit and handles sun, rain, snow and coastal air without fading, peeling or rotting.
Built from 100% recycled plastic
The Nautical 48" Swing is made from POLYWOOD® lumber, crafted from recycled HDPE plastics. It looks like painted wood but won't absorb moisture, so it won't rot, crack, splinter, chip or peel. UV-protected color stays rich season after season, and stainless steel hardware resists rust.
Made in the USA
POLYWOOD® makes the Nautical 48" Swing in the USA at its facilities in Indiana and North Carolina, and backs it with a 20-year residential warranty.
Easy care
No sealing, staining or painting, ever. Clean with mild soap, warm water and a soft-bristle brush, then rinse.
Specifications
| Brand | POLYWOOD® |
| Collection | Nautical |
| Style | Coastal-inspired 48-inch porch swing |
| Model | NS48 |
| Material | POLYWOOD® lumber made from 100% recycled HDPE plastics |
| Hanging hardware | Adjustable zinc-plated chain kit included (fits ceilings up to 9'; ceiling eye bolts or hooks not included) |
| Colors | 13 POLYWOOD® color options |
| Assembly required | Yes |
| Made in | USA (Indiana and North Carolina) |
| Warranty | 20-year residential |
| Overall (W × D × H) | 51.75" W × 25" D × 24.25" H |
Weight & Dimensions
| Overall (W × D × H) | 51.75" W × 25" D × 24.25" H |
| Width | 51.75 in |
| Depth | 25 in |
| Height | 24.25 in |
| Seat width | 45 in |
| Seat depth | 17.25 in |
| Weight capacity | 300 lbs per seat |
| Product weight | 56 lbs |
Installation Guide & Requirements
Check these before you buy: the swing hangs from two points on your porch ceiling, so it needs strong overhead framing and room to swing.
Requirements
| Ceiling support | A load-bearing beam or ceiling joists, at least 2x6 (2x6 or 2x8), supported on both ends and strong enough to carry the swing plus the people on it. |
| Ceiling height | Up to 9 ft with the included chain kit. |
| Hanging height | The seat should sit 17–19" above the floor (about 18"). |
| Hardware spacing | Two ceiling mounts about 55" apart, centered over where the swing will hang. |
| Swing clearance | 3–4 ft in front and behind, and 12–14" on each side. Plan for a clear area about 6½ ft wide × 8–10 ft deep. |
| Swing weight | 56 lbs. Plan on at least two people to lift and position it. |
| Weight capacity | 300 lbs per seat. |
| Included hardware | Adjustable zinc-plated chain kit: four 5 ft chains, 6 quick links, and 4 lag eye bolts with washers that attach the chains to the swing. Not included: the eye bolts or hooks for your ceiling. POLYWOOD leaves these out because every porch is built differently, so choose hardware that suits your framing. |
| Tools needed | 4mm T-handle hex key (included) to assemble the swing. To hang it: an adjustable wrench, tape measure and ladder, plus whatever tools your ceiling hardware calls for. |
How to install
- Assemble the swing. Put the swing together following POLYWOOD's instructions. Leave the bolts snug but not fully tight until step 3 of the instructions.
- Mark the mounts. Find a load-bearing beam or joists and mark two points about 55" apart, centered over where the swing will hang, with 3–4 ft clear in front and behind and 12–14" on each side.
- Install the ceiling hardware. Fasten your eye bolts or hooks (not included) securely into the framing.
- Attach the chains. Thread a chain through each armrest and fasten it with a quick link to the eye bolts at the front and back of the arm. Then join the upper chain to the center links so each side forms an upside-down "Y".
- Prop it up and hang it. With a helper, set the swing under the mounts at its final height. Upside-down 5-gallon buckets or cinder blocks work well. Connect the upper chains to the ceiling hardware with the quick links.
- Adjust and check. Adjust the upper chains so the seat sits about 18" off the floor, and the front and back chains for a comfortable recline. Make sure every quick link is fully closed, then test it gently before sitting down.
Tips
- Measure your porch before ordering: confirm the 6½ ft × 8–10 ft swing area is clear of railings, posts, doors and walkways.
- Bring a second person. At 56 lbs, the swing is too heavy to lift and hold level alone.
- Ceiling taller than 9 ft? The included chain is sized for porches up to 9 ft; extra chain is available from POLYWOOD customer service.
- Don't swap the chains for rope. POLYWOOD says replacing the chains with rope voids the warranty.
- White glove delivery providers do not install hanging systems on swings, so plan to hang it yourself or hire a handyman.
- Before each use, check that the ceiling hardware is tight, the quick links are closed and the chains are secure.
Installation video
Prefer to watch on YouTube? Open the video, or see POLYWOOD's how to hang a porch swing video. You can also download POLYWOOD's assembly and installation instructions (PDF).
Frequently Asked Questions
Is the POLYWOOD Nautical 48" Swing made from recycled plastic?
Yes. It is made from POLYWOOD® lumber, which is made from 100% recycled HDPE plastics.
Where is it made?
It is made in the USA at POLYWOOD's facilities in Indiana and North Carolina.
Can it stay outside all year?
Yes. POLYWOOD® lumber won't rot, crack, splinter or peel, and it holds its color with UV protection, so it can stay outdoors in every season.
What do I need to hang it?
Two ceiling eye bolts or hooks (not included) set about 55" apart in load-bearing 2x6 or 2x8 joists or a beam, a porch ceiling up to 9 ft tall, and a clear area about 6½ ft wide × 8–10 ft deep. The chain kit is included; see the installation guide above for details.
Can I install it myself?
Yes, with a helper. Assemble it with the included hex key, then hang it from ceiling eye bolts or hooks you supply. At 56 lbs, it's a two-person job. Note that white glove delivery providers do not install hanging systems on swings.
How long does shipping take?
It's made to order. Tracking is provided 7–10 days after ordering, when it ships from POLYWOOD, and delivery is free.
How do I clean it?
Clean with mild soap, warm water and a soft-bristle brush, then rinse.
Does it come with a warranty?
Yes. POLYWOOD® furniture is backed by a 20-year residential warranty.
